A standard edge tune is 90 degrees, though for more aggressive carving or hard snow you might opt for 89 degrees or less. (If you’re really serious about your edges you can even adjust the angle of the base edge too, though this level of precision is usually the realm of racers).
What angle are Burton edges?
All our boards come from the factory with a 1/1 edge tune (89° base of edge). By changing this right angle it’s possible to tune your board’s performance to suit your riding style or local conditions.
Should I sharpen my snowboard edges?
The board’s edges should be sharpened when there are nicks, burrs, rust, or the edge is dull. If your board is showing any of these signs–your edges need to be sharpened! … Sharpening the edges helps to keep your board in top shape and give you a smoother ride.
What angle should ski edges be?
To edge your skis using a “Get a Grip”, you must first choose whether you want your edges at 88° or 90°. 90° is sharp enough for beginners and intermediates and most snowboarders but for more advanced skiers go for 88°. Once you decide you should maintain this angle.
What is a gummy stone used for?
A gummy stone is a sort of rubber stone that feels like a very hard eraser. Once you’re done sharpening, a gummy stone is used to remove any last little burrs and give the edges a final polish. Run the gummy stone gently along the length of the base edge once or twice and then repeat along the side edge.
How often should you sharpen snowboard edges?
As a general rule, you should look to get it sharpened once a year, unless you are an avid snowboarder (in which case you may want it sharpened more often). Normally new snowboards come pre-sharpened so that shouldn’t be a problem for new buyers – which is one less worry from your mind!
Can you scrape too much wax off a snowboard?
The idea of scraping is to remove all the excess wax left on the base of the snowboard. You might think leaving some wax on the base of the snowboard is going to make you go a bit faster on the hill… but no, you’re WRONG! Leaving excess wax on the base is actually going to dry the base out quicker.
What is edge bevel on snowboard?
Beveling is the process of precisely angling each of the four edges of a snowboard to alter its turning and edge-holding characteristics. … Changing the angle of the base edge alters a boards turning personality and modifying the side edge adjusts the boards ability to grip while in a turn.
What can you use instead of a gummy stone?
A smooth rock, nail file, or even the metal poles of a ski stand will work pretty good for just taking the ‘edge’ off your edge… as such.
When should I edge my snowboard?
If they feel dull, rounded or burred, it’s time to sharpen them. For this you will need a proper ski or snowboard edging tool. This has a built-in guide enabling you to maintain the correct angle. Start with the base edge.
How do you keep snowboard edges from rusting?
Edges will rust in a few hours if you load a bag with a wet board. The easiest way to prevent it is to get a stick of old wax and rub it along all the edge. If you have rust, I’d get rid of it quickly. It’s not really an “issue” if it’s just a bit of surface rust.
What does tuning a snowboard do?
If you don’t wax your snowboard and take care of your snowboarding gear before going to ride you are just cutting yourself short. Tuning includes waxing, sharpening the edges and a few other things. … The first step in tuning a snowboard is to sharpen the edges. The easiest way to sharpen edges is to use a file guide.